Home Products Solutions Contact Us Resources
e-NETSource Global Sourcing Solutions
Home
Products
Solutions
Contact Us
Resources
Cambium Networks
Cyberoam
Emerson Network Power
Ericsson
HUAWEI
Mitel
Netcomm Wireless
Proxim Wireless
Robustel
Siklu
ZyXEL
 
e-NETSource
SOURCING SOLUTIONS








PRODUCT RESOURCES


Interconnect Pair Cables

  • Parallel Pair Cables for Ethernet and SAS Applications
  • Data Cables for Interconnect and Structured Networks
  • Pair Cables for Transmission and XDSL Applications
  • Pair and Multi Conductor Cables for Signal and Low Power Applications

Premises Network Copper Cables

  • Data cables for Structured Networks

Interconnect Fiber Optic Cables

  • Interconnect Fiber Optic Cables

Telecom Access Copper Cables

  • Telecom Access Copper Pair Cables
  • Hook-Up-Wire

Coaxial Cables

  • Coaxial Cables 75ohm
  • Coaxial Cables for CATV Systems 75 ohm
Power Cables for Telecom Applications






Page Information Source - Ericsson
Ericsson - All pictures


 













ERICSSON INTERCONNECT CABLE SOLUTIONS



Image
All pictures Ericsson
Ericssson Interconnect Cables offer consists of a wide range of fiber optic and copper cables designed, developed and manufactured to secure high performance in telecom and data network applications.

The variety is large and includes fiber optic and UL-listed, halogen-free pair and coaxial cables for high transmission properties for indoor and outdoor applications. here you can find a brief introduction of our various products and see the most typical products for different applications.


Products and Services

Interconnect Pair Cables
Ericsson offer Interconnect Pair Cables for use in telecom and data core nodes.
There is a large variety of cables with different pair counts, wire sizes, impedances, screenings and multi-core designs.
  • Parallel Pair Cables for Ethernet and SAS Applications
  • Data Cables for Interconnect and Structured Networks
  • Pair Cables for Transmission and XDSL Applications
  • Pair and Multi Conductor Cables for Signal and Low Power Applications

Premises Network Copper Cables
Ericsson offer copper cables for premises networks in homes or office environment applications. The cables are suitable to interconnect signals in data and alarm systems.
  • Data cables for structured Networks
Interconnect Fiber Optic Cables
Ericsson range of fiber optic cables for indoor installation is recommended for use in central office applications.

Telecom Access Copper Cables

Ericsson provide a large portfolio of Copper Cables for the telecom access network.
  • Telecom Access Copper Pair Cables
  • Hook-Up Wire

Coaxial Cables
Ericsson portfolio of 75ohm Coaxial Cables for transmission, radio, and CATV applications covers a large variety of sizes, single or multi core, indoor and outdoor versions.
  • Coaxial Cables 75 ohm
  • Coaxial Cables for CATV Systems 75 ohm

Power Cables for Telecom Applications
Ericsson offer more than a dozen flexible and flame-retardant power cables, designed to meet the requirements of the telecom industry. Customized design of cables is available on request.





INTERCONNECT PAIR CABLES

Image                                                                                                                                        All pictures Ericsson

Ericsson offer Interconnect Pair Cables for use in telecom and data core nodes. There is a large variety of cables with different pair counts, wire sizes, impedances, screenings and multi-core designs.

The range covers all needs of interconnecting signal and transmission up to 10 GBs



Parallel Pair Cables for Ethernet and SAS Applications

Image

Parallel pair cables are designed for core data and telecom nodes with high speed data interconnections.

Parallel Pair Cables

These cables are the optimal choice for data transfer up to 10 GB/s with Ethernet 10 Gbase-Cx4 or SAS 2.


 

TEL 301 8203   ECEFQBU/100
Designed to interconnect high speed data links like Ethernet 10 Gbase-CX4 SAS 2. Pair units with foamed polyolefin silver plated conductors in parallel, sealed with a plastic foil and screened with an aluminum foil establish unique high performance design with extremely low pair skew and return loss properties up to 5 GHz. Numbered pairs for easy identification. Common screen of tinned copper braid offers an secure connection in cable termination and EMC properties. The cable is jacketed with halogen-free, flame-retardant compound and intended for indoor use.

  • Rated to 5 GHz
  • Halogen-free design
  • Pair screened by AL-foil
  • UL listed CMR
  • Conductor 0.4 mm, 26 AWG
  • No. of pair  2 - 8



TEL 301 8110, 8100   ECEFQBU/100
Designed to interconnect high speed data links. Pair units with foamed polyolefin silver plated conductors in parallel, screened with an aluminum foil establish unique high performance design with low pair skew and return loss properties up to 1 GHz. Numbered pairs for easy identification. Common screen of tinned copper braid offers an secure connection in cable termination and EMC properties. The cable is jacketed with halogen-free, flame-retardant compound and is intended for indoor use.
  • Halogen-free design
  • Pair screened by AL-foil
  • UL listed CMR
  • Rated to 1 GHz
  • Conductor 0.4, 0.5 mm, 26, 24 AWG
  • No. of pair 4



TEL 301 8131   ECEFQBU/100 
Designed to interconnect high speed data transmission links. Pair units with foamed polyolefin silver plated conductors in parallel, screened with an aluminum foil establish a unique high performance design with low pair skew and return loss properties up to 2 GHz. Common screen of tinned copper braid offers an secure connection in cable termination and EMC properties. The cables is jacketed with halogen-free, flame-retardant compound and is intended for indoor use  
  • Halogen-free design
  • Pair screened by AL-foil
  • UL listed CMR
  • Rated to 2 GHz
  • Conductor 0.4 mm, 26AWG
  • No. of pair 8


Data Cables for Interconnect and Structured Networks

Image

Structured networks rely on high quality cables with enhanced transmission properties and robust designs to ensure a trouble free data network for the future of multimedia applications.

Ericsson portfolio includes all the standard types as CAT5, CAT6 and CAT7 screened, unscreened halogen-free and UL listed. Optimized versions down-sized to AWG 26 - 30 used in dense application intermediate links within switching nodes, data center and radio access nodes. Weather-protected designs for outdoor and direct-buried applications.

Data Cables


TFL 301 5010 FMQXB/100, Cat 5e, U/UTP, 26 AWG, Patch
Flexible U/UTP patch cable for interconnecting data and telecom equipment. Polypropylene insulated stranded wire, pair twisted and jacketed with a halogen-free compound. Intended for indoor use.

  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor, tin plated stranded wire, 26 AWG
  • UL listed CMR



TEL 301 6010 ECAFQBU/100, Cat 5e SF/UTP, 24 AWG
Designed for interconnecting data bus links within telecom and datacom applications. Foamed PE insulation, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant compound. Extending EMC properties of standard CAT5e cable.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.5 mm, 24 AWG
  • UL listed CMR



TFL 301 6010 FLAFQBU/100, Cat 5e SF/UTP, 26 AWG, Patch
Designed for interconnecting data bus patch links with in telecom and datacom applications. Robust design with solid PE insulation on a stranded tinned cu wire, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant compound.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.14 mm2, 26 AWG
  • UL listed CMR



TEL 301 8010 ECEFQBU/100, Cat 6 S/FTP, 23 AWG
S/FTP Cat 6 design with excellent transmission properties. Ideally suited to interconnect telecom and data system in structured data networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Cconductor 23 AWG
  • UL listed CMR



TEL 301 8011 ECEFQBU/100, Cat 6 S/FTP, 26 AWG
Optimized S/FTP Cat 6 design downsized to 26 AWG offering with reduced dimension but the same excellent transmission properties. Ideally suited to interconnect telecom and data system. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor  26AWG
  • UL listed CMR



TEL 301 8018 ECEFL/100, Cat 6 S/FTP, 23 AWG, Outdoor
Design with excellent transmission properties. Ideally suited to interconnect telecom and data system in outdoor structured data networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with Polyethylene.
  • Weather-proof for outdoor use
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 23 AWG
  • UL listed CMR



TEL 301 5020 EMQXBU/100, Cat 6 U/UTP, 23 AWG
Design with excellent transmission properties. Ideally suited to interconnect telecom and data system in structured data networks. The cable is polyolefin insulated, pair twisted and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Unscreened
  • Conductor  23 AWG
  • UL listed CM



TEL 301 8020 ECEFQBU/100, Cat 7 S/FTP, 23 AWG
Designed for future proof installations in data and multimedia networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 23 AWG
  • UL listed CMR



TEL 426  ELAFQBU/100,  Modified Cat 5 SF/UTP, 26 AWG
Modified SF/UTP cat 5, 26 AWG version, designed for interconnect data bus links within telecom applications. Robust design with solid PE insulation, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant compound.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.4 mm, 26 AWG
  • UL listed CMR
  • No. of pairs 4-12



TEL 301 6009  ECAFQBU/100, Modified Cat 5e SF/UTP, 26 AWG
Modified SF/UTP cat 5e, 26 AWG cable designed for installation in structured networks and intermediate links interconnecting data and telecom system. The cable is polyolefin foamskin insulated, pair twisted and screened by an aluminum foil and braid. Overall a jacket of halogen-free compound is applied. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.4 mm, 26 AWG
  • 1000 base-T limited length 60 m
  • UL listed CMR



TEL 301 6005 ELAFI/100, Modified Cat 5e SF/UTP, 26 AWG
Modified SF/UTP cat 5e, 26 AWG cable designed for interconnecting data bus links within indoor and outdoor telecom applications. Robust design with solid PE insulation, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant, weather-proof TPE-U compound.
  • Halogen-free design
  • Indoor and outdoor applications
  • Conductor 0.4 mm, 26 AWG
  • 1000 base-T limited length 60 m
  • UL listed VW-1



TEL 301 5002 ELQXBU/100, Modified U/UTP Cat 5, 30 AWG
Designed for interconnection of transmission systems requiring small cable dimensions. The cable is halogen free with polyolefin insulation, pair twisted and jacketed with a halogen-free, flame-retardant compound. Intended for indoor use.
  • Halogen-free design
  • Cable sizes 4-24 pair
  • Unscreened
  • 1000 base-T limited length 35 m
  • Conductor 0.25 mm, 30 AWG
  • UL listed CM



TEL 301 6007 EMAFQBU/100, Modified Cat 5 SF/UTP, 30 AWG
Designed for interconnection of transmission systems requiring small cable dimensions. The cable is halogen free with polyolefin insulation, pair twisted, screened by an aluminum foil and braid and jacketed with a halogen-free, flame-retardant compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Cable sizes 4-24 pair
  • 1000 base-T limited length 30 m
  • Conductor 0.25 mm, 30 AWG
  • UL listed CM



TEL 301 6029 EMAFQBU/100, Modified Cat 5 SF/UTP, 28 AWG
Designed for interconnection of transmission systems requiring small cable dimensions. The cable is halogen free with polyolefin insulation, pair twisted, screened by an aluminum foil and braid and jacketed with a halogen-free, flame-retardant compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Cable sizes  4, 2x4 pair
  • 1000 base-T limited length 40 m
  • Conductor 0.32 mm, 28 AWG
  • UL listed CM



TEL 301 5205 ELQXBU/100, Modified Cat 5 U/UTP, 26 AWG
UTP cable designed for installation in Telecom networks interconnecting data and telecom system with VDSL2 transmission. The cable is polyolefin insulated, pair twisted and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Unscreened
  • Cable size  12 pair
  • Conductor 0.4 mm, 26 AWG
  • UL listed CM



TEL 301 8001 ELEFQBU/100, Modified S/FTP cat 7, 30 AWG
Combines the properties of a compact design and high level of signal integrity for multi pair cables. The silver plated conductors are insulated with PE, pair twisted and pair screened covered by a common braid and a halogen-free, flame-retardant compound.
  • Halogen-free design
  • Pair screened by Al- foil
  • No. of pairs 4-24
  • Impedance 100 ohm
  • Conductor 0.25 mm, 30 AWG
  • UL listed CMR


Pair Cables for Transmission and XDSL Applications

Image

Ericsson offer pair cables with matching impedance, pair count and EMC properties for Transmission nodes and DSLAMS.


Pair Cables for 100, 110 and 120 ohm transmission

Product range covers 100, 110 and 120 ohm, pair count 1-100, common screened, pair screened or unscreened, halogen-free and UL listed for indoor or outdoor installations.



TEL 481 ELAQBU/100, 120
Designed for interconnection of transmission systems with a wide range of pair count and impedance covering the demands in all markets. The cable is halogen-free with polyethylene insulation, pair twisted, screened with a combined aluminum foil and braid, jacketed with a halogen-free, flame-retardant compound.
  • Halogen-free design
  • Screened by AL-foil and braid
  • No. of pairs 1-32
  • Impedance 100, 110, 120 ohm
  • Conductor 0.4 mm, 26 AWG
  • UL listed CM - CMR depending on cable size



TEL 301 6030 32 ECAFQBU/100, /120
Optimized design for interconnection of transmission systems with a wide range of pair count and impedances covering the demands in all markets. The cable is halogen-free with foamed polyethylene insulation, pair twisted, screened with a combined aluminum foil and braid, jacketed with a halogen-free, flame-retardant compound.
  • Compact and halogen-free design
  • UL listed CMR
  • Screened by AI-foil and braid
  • Cable sizes 1-16 pair
  • Impedance 100, 120 ohm
  • Conductor 0.4 mm, 26 AWG



TEL 301 6035 ECAFQBU/120
Intended for indoor use in transmissions systems. The cable is insulated with foam skin polyolefin, pair twisted and screened by an aluminum foil and braid. Overall a jacket of halogen-free compound is applied. Ideally suited for E1 transmission applications
  • Compact and halogen-free design
  • UL listed CM
  • Screened by AI-foil and braid
  • Cable sizes 16-64 pair
  • Impedance 120 ohm
  • Conductor 0.4 mm, 26 AWG



TEL 301 5034 ELQXB/100
Intended for indoor use in transmission systems. The cable is polyolefin insulated, pair twisted and jacketed with a halogen-free compound. Ideally suited for XDSL transmission applications.
  • Compact and halogen-free design
  • Rated to 10 MHz
  • Unscreened
  • Cable size 64 pair
  • Impedance 100 ohm
  • Conductor 0.4 mm, 26 AWG



TEL 301 6034 ELAFQB/100  
Screened version of TEL 301 5034. Intended for indoor use in transmission systems.The cable is polyolefin insulated, pair twisted, screened by an aluminum foil and braid and jacketed with a halogen-free compound. Ideally suited for XDSL transmission applications.
  • Compact and halogen-free design
  • Rated to 10 MHz
  • Screened by AI-foil and braid
  • Cable size 64 pair
  • Impedance 100 ohm
  • Conductor 0.4 mm, 26 AWG



TEL 313 0715 ELAQBEU
Intended for indoor use in telecommunication systems. The cable is polyethylene insulated, pair twisted into units, screened by an aluminum foil and jacketed with a halogen-free thermoplastic compound. Ideally suited for XDSL applications and E1 transmission.
  • Halogen-free design
  • Screened by AL-foil
  • Conductor 0.5 mm 24 AWG
  • Cable sizes 10-100 pair
  • Impedance 120 ohm
  • Complies with SS 424 16 93, TeliaSonera A 952 1676
  • Flame-retardant IEC 60332-3-24



TEL 313 6000 ELAQBEU-FF
Intended for indoor use in telecommunication systems. The cable is polyethylene insulated, pair twisted into units, screened by an aluminum foil and jacketed with a halogen-free thermoplastic compound. Ideally suited for XDSL applications.
  • Halogen-free design
  • Screened by AL-foil
  • Conductor 0.4 mm 26 AWG
  • Cable sizes 24 -100 pair
  • Impedance 120 ohm
  • TeliaSonera A 952 1675
  • Flame-retardant IEC 60332-3-24



TEL 301 7003 ELEQQBU/120
Intended for indoor use in transmission systems. Multi pair 120 ohm halogen-free cable with individually screened and jacketed pairs. Ideally suited for E1 transmission applications with high requirements of transmission properties and easy handling.
  • Halogen-free
  • Individually screened and jacketed pairs
  • Cable sizes 2.8 pair
  • Impedance 120 ohm
  • Conductor 0.4 mm, 26 AWG
  • Twin shaped web makes it easy to split apart the two pair version
  • Eight pair version with sequence numbered pair units and common outer jacket



TEL 301 8003 ECEQFQBU/120
Covers the demand for transmission with a high degree of screening due to its double screen design. PE insulated, pair twisted, pair screened and jacketed. Covered by a common braid and jacketed with a halogen-free, flame retardant compound.
  • Halogen-free design
  • Pair screened by AL-foil
  • Common isolated screen
  • Impedance 120 ohm
  • Conductor 0.4 mm, 26 AWG
  • UL listed CMR



TEL 301 8008 ECEQFI/120
Outdoor version of TEL 301 8003, jacketed with a halogen-free, flame-retardant, weather-proof TPE-U compound.
  • Halogen-free design
  • Pair screened by AL-foil
  • Common isolated screen
  • Impedance 120 ohm
  • Conductor 0.4 mm, 26 AWG
  • Fire retardant
  • In and outdoor installations



EUALEV
Intended for outdoor use in distribution network for telecommunication systems. The cable is polyethylene insulated, pair twisted into units, jelly filled, screened by an aluminum tape and jacketed with polyethylene. Suitable for underground installations in ducts or direct buried.
  • Halogen-free design
  • Complies with Swedish standard SS 424 16 22 and TeliaSonera A 952 1694
  • Cable size 5 - 300 pair
  • Impedance 120 ohm
  • Conductor 0.5 mm, 26 AWG and 0.7 mm
  • Excellent protection for water penetration by the moisture barrier of aluminum tape and jelly filling
  • Outdoor installations


Pair and Multi Conductor Cables for Signal and Low Power Applications

Ericsson offer pair and multi-conductor cables for use in telecom, signal and low-power applications.

Pair and Multi Conductor Cables

The Wire size 20-28 AWG solid or stranded, screened or unscreened, halogen-free, UL listed, for indoor or outdoor installations.



TEN 280, TEN 250
Optimized for telecom use with high demands of durability and reduced dimensions. The cable uses polyamide insulation which gives excellent mechanical protection, pair twisted into units and jacked with a halogen-free, flame-retardant compound or PVC.
  • Compact and durable
  • Cable sizes 4-128 pair
  • Conductor 0.4 mm, 26 AWG
  • UL listed CM
  • Halogen-free design TEN 280
  • PVC version TEN 250



TEN 480, TEN 420
Optimized for telecom use with high demands of durability, reduced dimensions and screening. The cable uses polyamide insulation which gives excellent mechanical protection, pair twisted into units. Screened with a combined aluminum foil and braid and jacketed with a halogen-free, flame-retardant compound or PVC.
  • Compact and durable
  • Screened by AL-foil and braid
  • Cable sizes 4- 128 pair
  • Conductor 0.40 mm, 26 AWG
  • UL listed CMR
  • Halogen-free design TEN 480
  • PVC version TEN 420





PREMISES NETWORK COPPER CABLES

Image                                                                                                                                       All pictures  Ericsson

Ericsson offer copper cables for premises networks in homes or office environment applications. The cables are suitable to interconnect signals in data and alarm systems.


Structured Networks relies on high-quality cables with enhanced transmission properties and robust designs to ensure a trouble-free data network for the future of multimedia applications.

Image

Ericsson portfolio includes all of the standard types CAT5, CAT6 and CA7 screened, unscreened, halogen-free and UL listed. The cables are weather-protected for outdoor direct-buried applications.


Data cables for Structured Networks


TFL 301 5010 FMQXB/100, Cat5e U/UTP, Patch
Flexible U/UTP patch cable for interconnecting data and telecom equipment. Polypropylene insulated stranded wire, pair twisted and jacketed with a halogen-free compound. Intended for indoor use.

  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor, tin plated stranded wire, 26 AWG
  • UL listed CMR


GRHSLLDV
TEL 301 6010 ECAFQBU/100, Cat5e SF/UTP
Designed for interconnecting data bus links within telecom and datacom applications. Foamed PE insulation, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant compound. Extending EMC properties of standard CAT5e cable.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.5 mm, 24 AWG
  • UL listed CMR



TFL 301 6010 FLAFQBU/100, Cat5e SF/UTP, Patch
Designed for interconnecting data bus patch links with in telecom and datacom applications. Robust design with solid PE insulation on a stranded tinned cu wire, pair twisted, screened by an AL-foil and braid jacketed with a halogen-free, flame-retardant compound.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 0.14 mm2, 26 AWG
  • UL listed CMR



TEL 301 8010 ECEFQBU/100, Cat6 S/FTP
Design with excellent transmission properties. Ideally suited to interconnect telecom and data system in structured data networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Cconductor 23 AWG
  • UL listed CMR



TEL 301 8011 ECEFQBU/100, Cat6 S/FTP
Optimized design downsized to 26 AWG offering reduced dimension with excellent transmission properties. Ideally suited to interconnect telecom and data system. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 26 AWG
  • UL listed CMR



TEL 301 8018 ECEFL/100, Cat6 S/FTP, Outdoor
S/FTP Cat 6 design with excellent transmission properties. Ideally suited to interconnect telecom and data system in outdoor structured data networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with Polyethylene.
  • Weather-proof for outdoor use
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 23 AWG
  • UL listed CMR



TEL 301 5020 EMQXBU/100, Cat6 U/UTP
Design with excellent transmission properties. Ideally suited to interconnect telecom and data system in structured data networks. The cable is polyolefin insulated, pair twisted and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Unscreened
  • Conductor 23 AWG
  • UL listed CM



TEL 301 8020 ECEFQBU/100, Cat7 S/FTP
Design for future proof installations in data and multimedia networks. The cable is polyolefin insulated, pair twisted and screened by an aluminum foil. Overall screened by a tinned copper braid and jacketed with a halogen-free compound. Intended for indoor use.
  • Halogen-free design
  • Screened by AL-foil and braid
  • Conductor 23 AWG
  • UL listed CMR


Signal and Alarm Cables for Premises Network



TEL 310 201 ELQRB
Intended for signal and alarm systems for in and outdoor applications. Polyethylene insulated and
jacketed with flame-retardant halogen-free compound.



TEL 310 0087 ELQYB 1.0
Intended for fire alarm systems for in and outdoor applications. Polyethylene insulated and jacketed with flame retardant halogenfree compound.



RKKR
Flexible cable for indoor signal applications PVC insulated and jacketed.



PFSK
Intended for signal systems for in and outdoor applications. PVC insulated and jacketed Sceened by tinned copperbraid.



PTS
Signal and alarm cable for indoor applications. PVC insulated and jacketed pair tvisted and screened by AL-foil.






INTERCONNECT FIBER OPTIC CABLES

Image

Ericsson range of fiber optic cables for indoor installation is recommended for use in central office applications.


Fiber Optic Cables

Here you will find cables for interconnection between the optical line interface (OLT) and the optical distribution frames (ODF). The indoors cables are also suitable for use in LAN networks or other types of data networks.

All indoor cables are halogen-free and flame-retardant, and consequently generate no corrosive gases during combustion. All cables are also completely dielectric. The fibers in the cable can be of different types and different fiber types can be mixed in the same cable.



GNGQBDU, 1-Fiber, TOL 405 3001/1
Simplex, buffered patch cord cable, non-jelly filled with an outer diameter of 2.0 mm as standard. It can be delivered pre-terminated with a variety of connector types. The cable has low shrinkage of less than 0.5% for reliable high performance. 

  • Design: Tight buffered
  • Type: Halogen-free, flame-retardant, IEC60332-3 cat C (LSZH), UL 1666 (CMR/Riser)
  • Capacity: 1 fiber



GNGQBDU, 2-fiber, TOL 405 3001/2
Two-fiber, tight-buffered duplex patch cord cable, non-jelly filled and aramid reinforced. The cable has a figure-8 design with single fibers laid in parallel, which makes it easy to split into two simplex patch cables. 

  • Design: Tight buffered
  • Type: Halogen-free, flame-retardant, IEC60332-3 cat C (LSZH), UL 1666 (CMR/Riser)
  • Capacity: 2 fiber


GNGQQBDU-2
GNGQQBDU, 2-fiber, TOL 405 3006
Two fiber, tight-buffered duplex patch cord cable, non-jelly filled and aramid reinforced. Two single fiber cables are enclosed in an outer sheath forming a flexible and dry cable with an outer dimension of 4.8x2.8mm. It can be delivered pre-terminated with a variety of connector types. 

  • Design: Tight buffered, break-out
  • Type: Halogen-free, flame-retardant, IEC60332-3 cat C (LSZH), UL 1666 (CMR/Riser)
  • Capacity: 2 fiber



GNGQQBDU, 4-fiber, TOL 405 3018  
Break-out cable where simplex cables are put into one cable, with aramid yarn as central strength member. The construction results in a robust cable combined with high flexibility. The cable can be delivered pre-terminated with a variety of connector types.

  • Design: Tight buffered, break-out
  • Type: Halogen-free, flame-retardant
  • Capacity: 4 fiber




TELECOM ACCESS COPPER CABLE

Image                                                                                                                                                     
All pictures Ericsson


Ericsson provide a large portfolio of Copper Cables for the telecom access network.

Ericsson offering covers different designs, single or multi pair, wire sizes, unscreened or screened, armored for indoor applications, as well as outdoor applications in duct, aerial or direct buried.


Telecom Access Copper Pair Cables

Image

Ericsson offer air cables designed for XDSL and POTS transmission in telecom access network applications.

Ericsson product range covers unscreened, screened, single or multi pair, wire size 0.4-0.7 mm, halogen-free flame retardant for indoor, and  weather protected outdoor versions for duct and aerial installation.

Access Pair Cables


EUALEV
Intended for outdoor use in distribution networks. The cable is polyethylene insulated, pair twisted into units, jelly filled, screened by an aluminum tape and jacketed with polyethylene. Suitable for underground installations in ducts or direct buried.

  • Halogen-free design
  • Complies with Swedish standard SS 424 16 22 and TeliaSonera A 952 1694
  • Cable size 5 - 300 pair
  • Impedance 120 ohm
  • Conductor 0.5 mm, 24 AWG and 0.7 mm
  • Excellent protection for water penetration by the moisture barrier of aluminum tape and jelly filling
  • Outdoor installations
 

ECALEV
Intended for outdoor use in distribution networks. The cable is polyethylene insulated, pair twisted into units, dry water-block, screened by an aluminum tape and jacketed with polyethylene. Suitable for underground installations in ducts or direct buried.
  • Suitable for XDSL application
  • Impedance 120 ohm
  • Halogen-free
  • Dry, water-block protection for water penetration with moisture barrier of aluminum tape bounded to PE jacket, secure installations in wet conditions
  • Cable sizes 5-100 pair with conductor sizes 0.5 as standard
  • Complies with TeliaSonera A 952 1680  based upon Swedish standard SS 424 16 22


ELALE
Intended for outdoor use in access networks. The cable is polyethylene insulated, pair twisted into units, screened by an aluminum tape and jacketed with polyethylene. Suitable for underground installations in ducts or direct buried in pressurized network and maintenance of paper insulated cables.
  • Halogen-free design
  • Complies with TeliaSonera A 952 1690
  • Cable size 10-100 pair
  • Conductor 0.5 mm
  • Excellent protection for water penetration by the moisture barrier of aluminum tape
  • Outdoor installations


ELLCE
Intended for outdoor use in distribution networks. Polyethylene insulated, pair twisted into units and jacketed with polyethylene including an suspension strand of zinc coated steel wires. Suitable for overhead installations on poles.
  • Figure-8 design with standardized suspension web for easier installation
  • Robust design with solid insulation of Polyethylene
  • Cable sizes 5 - 100 pair with conductor sizes 0.5 and 0.7mm as standard
  • Complies with Swedish standard SS 424 16 62 and TeliaSonera A 099 0222


ELLY
Intended for outdoor use as a subscriber cable in distribution networks. The cable is polyethylene insulated, twisted into a star quad and jacketed with polyethylene. Suitable for buried installations
  • Compact and durable design
  • Cable size 2 pair with conductor size 0.6 mm as standard
  • Complies with Swedish standard SS 424 16 60 and TeliaSonera A 952 1689


ELLC
Intended for outdoor use as an aerial subscriber cable in distribution networks. The cable is polyethylene insulated, twisted into a star quad and jacketed with polyethylene including an suspension strand of zinc coated steel wires. Suitable for overhead installations on poles.
  • Figure-8 design with standardized suspension web for easier installation.
  • Robust design with solid insulation of Polyethylene
  • Cable size 2 pairs with conductor size 0.6 mm as standard
  • Complies with Swedish standard SS 424 16 61 and TeliaSonera A 099 0223


ELQXBE (ELLXEB)
Intended for indoor use in telecom systems. The cable is polyethylene insulated, pair twisted into units or twisted into a star quad for 2 pair cable. Jacketed with a halogen-free thermoplastic compound.
  • Halogen-free design
  • Un-screened
  • Conductor 0.5 mm 24 AWG
  • Cable sizes 2-100 pair
  • Complies with SS 424 16 92
  • Flame-retardant IEC 60332-1-2, SS 424 1475 F2


ELAQBEU
Intended for indoor use in telecom systems. The cable is polyethylene insulated, pair twisted into units, screened by an aluminum foil and jacketed with a halogen-free thermoplastic compound. Ideally suited for XDSL applications and E1 transmission.
  • Halogen-free design
  • Screened by AL-foil
  • Conductor 0.5 mm 24 AWG
  • Cable sizes 10-100 pair
  • Impedance 120 ohm
  • Complies with SS 424 16 93, TeliaSonera A 952 1676
  • Flame-retardant IEC 60332-3-24


ELAQBY
Intended for indoor and outdoor use in telecommunication, data and alarm systems. The cable is polyethylene insulated, pair twisted into units, screened by an aluminum foil and jacketed with a halogen-free thermoplastic compound.
  • Screened by an aluminum foil
  • Halogen-free
  • Flame-retardant IEC 60332-1-2 , SS 424 1475 F2
  • Robust design with insulation of solid polyethylene
  • Cable sizes 2-100 pair with conductor size 0.6 mm
  • Complies with SS 424 16 52


ELQYB
Intended for indoor and outdoor non-buried installations as subscriber cable in distribution networks. The cable is polyethylene insulated, twisted into a star quad and jacketed with a halogen-free thermoplastic compound.
  • Halogen-free design
  • Unscreened  
  • Conductor 0.6 mm
  • Cable size 2 pair
  • Indoor and outdoor installations
  • Complies with SS 424 16 53
  • Flame-retardant IEC 60 332-1-2


EKU
Intended for indoor use as a subscriber cable in distribution network for telecom and signaling systems. Twin copper conductors laid in parallel and jacketed with a flame-retardant PVC compound.
  • Compact and durable design.
  • Cable size 1 pair with conductor size 0.7 mm as standard.
  • The web between conductors enables fast and simple installation by nailing
  • Complies with Swedish standard SS 424 16 02
  • Flame-retardant IEC 60332-1-2
  • RoHS compliant


EQQXBU (ELLXB)
Intended for indoor use in telecommunication, data and alarm systems. The cable is insulated with a flame retardant halogen-free compound, pair twisted into units and jacketed with a halogen-free, flame-retardant thermoplastic compound.
  • Halogen-free
  • Flame-retardant IEC 60332-3-24, SS 424 1475 F4C
  • Cable sizes 2-100 pair with conductor size 0.5 mm
  • Complies with SS 424 16 90


Hook-Up Wire

Image

Hook-up wires are to be used in cross connect applications.

The wire comes in sizes between 0.4 to 1.0 mm, with single, pair or multi core PA or PVC insulated for cross connections in MDF and/or DDF telecom applications.

Hook-up Wire


ENUBB
Intended for indoor use as hook-up wire in telecom and signal systems. The wire is insulated with polyamide and consists of 1 - 6 cores. Ideally suited for cross connect applications within telecom systems that require a robust design and easy installation.

  • Excellent durability by the polyamide insulation
  • Halogen-free design
  • Easy to install as the polyamide offers a low-friction surface.
  • Available in versions of singles, pairs, quads and 5 or 6 cores
  • Solid tin plated copper wire
  • Conductor dimension 0.4-1.38 mm  0.13 -1.5 mm
  • Complies with Swedish standard SS 424 16 91
  • Flame-retardant IEC 60332-2





COAXIAL CABLES

Image
All pictures Ericsson

Ericsson portfolio of 75ohm Coaxial Cables for transmission, radio, and CATV applications covers a large variety of sizes, single or multi core, indoor and outdoor versions.


Coaxial Cables 75 ohm

Image

Ericsson's offering of Coaxial Cables 75ohm, suitable for E1-STM1 transmission applications, includes single and multi-core coax in several optimized designs.

We provide halogen-free as standard or PVC versions, screened or weather-proof jacketed versions for severe conditions in indoor and outdoor installations.

Coaxial Cables 75 ohm

GRHSLDV
TZC 750 24, TZC 750 25  
Telecom standard cable for E1 transmission. Well known as durable for dense installations securing transmission with its double screen. The inner conductor is covered by a dielectric of solid PE and the outer conductor, with a double tinned braid. is covered by a PVC or halogen-free, flame-retardant compound.

  • Dimension 0.31/1 .95
  • Double braid
  • Wide range of suitable connectors
  • Flame retardant IEC 60332-3-24
  • PVC version TZC 750 24
  • Halogen-free version TZC 750 25


TZC 750 05, TZC 752 1001  
Telecom standard cable for E1 transmission. Well known as durable for long cable runs, securing transmission with its double screen. The inner conductor is covered by a dielectric of solid PE and the outer conductor, with a double tinned braid, is covered by a PVC or halogen-free, flame-retardant compound.
  • Dimension 0.5/3.0
  • Double braid
  • Wide range of suitable connectors
  • Flame retardant IEC 60332-3-24
  • PVC version TZC 750 05
  • Halogen-free version TZC 752 1001


TZC 752 2201 KLQXBU HF 75 0.3/1.40
Optimized design with a space reduction of 40% compared to TZC 75025 with equivalent transmission properties. Due to the use of high foamed PE as a dielectric and an outer conductor of combined AL-foil and tinned braid covered by a halogen-free, flame-retardant compound.
  • Compact and halogen-free design
  • Dimension 0.31/1.40
  • Outer conductor of AI-foil and braid
  • Flame-retardant lEC 60 332-3-24


TZC 752 2204  KCQXBU HF 75 0.6/2.8
Optimized design with a space reduction of 50% compared to BT 2003 with equivalent transmission properties. Due to the use of high foamed PE as a dielectric and an outer conductor of combined AL-foil and tinned braid covered by a halogen-free, flame-retardant compound.
  • Compact and halogen-free design
  • Dimension 0.6/2.8
  • Outer conductor of AI-foil and braid
  • Flame-retardant lEC 60 332-3-24


TZE 101 09, TZE 101 10  
This double version of TZC 750 24 and TZC 750 25, offers a fast and easy installation. Easy to split apart by hand due to the twin shaped web.
  • Dimension 0.31/1.95
  • Double braid
  • Wide range of suitable connectors
  • Easy to split due to twin shaped web
  • Flame-retardant lEC 60 332-3-24
  • PVC version TZE 101 09
  • Halogen-free version TZE 101 10


TZE 102 7322 KCQXBU 2 HF 75 0.31/1.40
This double version of TZC 752 2201 offers fast and easy installation with a reduction of space of 40% according to TZE 101 10. Easy to split apart by hand due to the twin shaped web.
  • Dimension 0.31/1.40
  • Outer conductor of AL-foil and braid
  • Easy to split due to twin shaped web
  • Flame-retardant lEC 60 332-3-24
  • Compact and halogen-free design


TZE 101 06, TZE 101 11  
Designed for easy installation in long cable runs. The cable include  eight single coaxial cables of TZC 750 24 or TZC 750 25 type and is covered with a common jacket of PVC or halogen-free, flame-retardant compound which offers fast and easy installation and protection for severe installations.
  • Dimension 0.31/1.95
  • Double braid
  • Wide range of suitable connectors
  • 8 core version for fast installation
  • Flame retardant lEC 60 332-3-24
  • PVC version TZE 101 06
  • Halogen-free version TZE 101 11


TZE 102 7112 KLQQBU 14 16 HF 75 0.31/1.95
Designed for easy installation in long cable runs. The cable include 16 single coaxial cables of TZC 750 25 type covered with a common jacket of halogen-free, flame-retardant compound which offers fast and easy installation and protection for severe installations.
  • Dimension 0.31/1.95
  • Double braid
  • Wide range of suitable connectors
  • 14 and 16  core version for fast installation
  • Flame retardant lEC 60332-3-24
  • Halogen-free


TZE 102 7121 KCQQBU 4, 8, 16, 32 HF 75 0.31/1.40
Combines the reduction of space and offers equal transmission properties as TZE 101 11 by the use of the new single coaxial cable TZC 752 2201. Covered with a common jacket of halogen-free, flame-retardant compound offers a fast and easy installation and protection for severe installations.
  • Compact and halogen-free design
  • Dimension 0.31/1.40
  • Outer conductor of Al-foil and braid
  • 4,8,16 and 32 core versions for fast and easy Installation
  • Flame-retardant lEC 60 332-3-24


TZE 101 15, TZE 101 16, KLQAFQBU 2, 8 HF 75 0.3/1.95
Based on TZC 750 25, with a common extra screen to secure EMC properties in transmission systems. 75 ohm coaxial cable with a dielectric of solid polyethylene, double braided and jacketed with a halogen-free compound. Covered with a common screen of aluminum foil and braid and jacketed with a halogen-free compound. Secures excellent EMC performance and robustness
  • Dimension 0.31/1.95
  • Double braid
  • Wide range of suitable connectors
  • 2 or 8 core version
  • Flame retardant lEC 60 332-3-24
  • Excellent EMC properties by the common extra screen of Al-foil and braid
  • Halogen-free


TZE 101 23, TZE 101 24, KCQFQBU 2 HF 75 0.31/1.40
Based on TZC 752 2201, with a common extra screen secures EMC properties in transmission systems. Suitable for indoor E1 transmission applications. The multi coax cable consists of 75 ohm halogen-free coaxial cable and signal wire, stranded, screened and jacketed with a halogen-free compound.
  • Compact and halogen-free design
  • Dimension 0.31/1 .40
  • Excellent EMC properties by the common extra screen
  • 2 core versions for fast and easy installation
  • Flame-retardant lEC 60 332-3-24
  • For indoor applications
  • TZE 101 23 without signal wire
  • TZE 101 24 with signal wire


TZE 102 7323 KCQFI 2, 4 HF 75 0.31/1.40 
Based on TZC 752 2201, with a common extra screen secures EMC properties in transmission systems. Suitable for indoor and outdoor E1 transmission applications. The multi coax cable consists of 75 ohm halogen free coaxial cable, stranded, screened and jacketed with a halogen-free, flame-retardant, weather-proof TPE-U compound.
  • Compact and halogen-free design
  • Dimension 0.31/1.40
  • Excellent EMC properties by the common extra screen
  • 2 and 4 core versions for fast and easy installation
  • Flame-retardant lEC 60 332-1
  • For outdoor and indoor applications


Coaxial Cables for CATV Systems 75 ohm

Image

Ericsson offer coaxial cables suitable as drop cables in CATV networks. Our product range includes several versions for indoor and outdoor installation.

Indoor CATV drop cables


Intended for indoor use in CATV systems.
Solid bare copper wire  with solid or high foamed dielectric. Screened by al-foil and tinned copper braid, jacketed with PVC or halogen-free compound.

Product variants:


KTV 0.7/4.8 HV,  PVC version

  • Foamed dielectric for low attenuation
  • Dimension 0.8/3.6 wire / dielectric
  • PVC jacket
KTV 0.8/3.6 LSZH , Halogen-free version  
  • Foamed dielectric for low attenuation
  • Dimension 0.8/3.6 wire / dielectric
  • Halogen-free
KTV 1.0/4.8 CV, PVC version
  • Foamed dielectric for low attenuation
  • Dimension 1.0/4.8 wire / dielectric
  • PVC jacket
KTV 1.0/4.8 LSZH, Halogen-free version
  • Foamed dielectric for low attenuation
  • Dimension 1.0/4.8 wire / dielectric
  • Halogen-free
KTV 1.6/7.3 CV, PVCversion
  • Foamed dielectric for low attenuation
  • Dimension 1.6/7.3 wire / dielectric
  • PVC jacket
KTV 1.6/7.3 LSZH, Halogen-free version
  • Foamed dielectric for low attenuation
  • Dimension 1.6/7.3 wire / dielectric
  • Halogen-free


Outdoor CATV drop cables


Intended for outdoor use in CATV systems.
Solid bare copper wire with a high foamed dielectric. Screened by Cu-foil and braid, jacketed with a weather proof Polyethylene.


KTV 1.6/7.3 CE

  • Foamed dielectric for low attenuation
  • Dimension 1.6/7.3 wire / dielectric
  • RF screened by Cu-foil and braid
  • Halogen-free  





Power Cables for Telecom Applications

Ericsson offer more than a dozen flexible and flame-retardant power cables, designed to meet the requirements of the telecom industry. Customized design of cables is available on request.

 
TFK 1030, SE-A1VV-K  
Double-insulated single conductor for connection of back-up batteries, central office power distribution or grounding.


TFL 1031, S1Z1Z1-K  
Double-insulated, halogen-free single conductor for connection of back-up batteries, central office power distribution or grounding.



TFL 1045, S1Z1-K 
Flexible, single conductor with halogen-free insulation, for internal wiring and grounding of equipment. To be used in dry environments.


TFL 2521, RLCL
  
Coaxial power cable with halogen free insulation and jacket. DC cable intended for automotive and telecom applications. To be used indoors and under dry conditions.



TFL 2522, RLL 
Cable for power supply in telecom equipment, halogen-free insulation and sheath. To be used in dry environments.



TFL 2523, RLL
This cable for power supply in telecom applications has halogen-free insulation and sheath, and is for use in dry environments.



TFL 252 406, RLL 
This cable for power supply in telecom equipment has halogen-free insulation and jacket, and is for use in dry environments.



TFL 252 5, RLCL
This cable for AC or DC circuits in telecom equipment has halogen-free insulation and a jacket with an EMC screen.



TFL 281 32, RLH 
A halogen-free, flexible connecting cable for use in telecom equipment where low inductance and good temperature resistance are required.


TFL 2822, RLL 
Connecting cable for use in telecom equipment where good flexibility is required.



TFL 301 5001, RQ 
This power distribution cable for low-voltage use up to 100V is halogen free, flexible and intended for indoor use.



TFL 492 32, RLAFH 
A halogen-free, shielded connecting cable for use in telecom equipment where low inductance and good temperature resistance are required. Suitable in areas that require high electromagnetic compatibility.


 
TFL 495 01, RLL 
Power cable for indoor use in telecommunication equipment. Intended to be used for power distribution of 24/48V DC.



TFL 495 06/02, RLL
This cable for power supply in telecom equipment is halogen free and includes a flame-retardant insulation and sheath. To be used in dry environments, for internal and external wiring of appliances.


Page Information Source - Ericsson




Home | Products | Solutions | Contact Us | Resources
Site Map